Hydraulic Chutes

Hydraulic squeeze chutes are available in three models. All hydraulic chutes feature a “scissor” headgate and tailgate. All models come standard with electrical power units installed with 3 HP electric motor and 10 GPM vane pump. Chutes are L/H operation and have plate on opposite side with extra hose to quickly switch to R/H operation.

Frame and side panel material is 3" x 2" rectangular tube frame 3/16" wall thickness. Side panels allow 100% neck access on both sides giving user excellent access for
“Shot-Zone”.

Hydraulic chutes come standard with top and bottom hydraulic squeeze. Side release and side palp door are available in two models.

WIDE opening scissor gates open to a maximum top width
of 37" and bottom width of 17". Side and top squeeze allow you to adjust chute down to 15" top width and 8" bottom width when fully squeezed down.

Lower half of the animal can be accessed through the drop-down lower side panels. Drop tubes have quick release on both sides for branding. Palpation door opens to 20" for excellent access.